Projects/PRJ-2601/Measure sheet v3

Measure sheet v3

PRJ-2601 Mosman kitchen & butler’s pantry · production measure · submitted 11/08/2026 by Peter Walsh · v2 remains the effective revision

Open projectPending

Measured items

7 lines, 8 pieces13.20 m²

Measured lines on revision v3
Area	Description	Length	Depth	Qty	Area	Edge	Notes
Main kitchen	Benchtop run A	2410 mm	640 mm	1	1.54 m²	Mitred 40 mm	Cabinet datum recorded; sink centre 980 mm from the left
Main kitchen	Benchtop run B	1840 mm	640 mm	1	1.18 m²	Mitred 40 mm	Cooktop cut-out 600 × 520
Main kitchen	Splashback	2410 mm	600 mm	1	1.45 m²	Pencil round	Full height to the underside of the overheads
Island	Top	2800 mm	1100 mm	1	3.08 m²	Mitred 40 mm	Book-matched to run A
Island	Waterfall ends	900 mm	1100 mm	2	1.98 m²	Mitred 40 mm	Both ends, vein continued over the mitre
Butler’s pantry	Benchtop	3200 mm	640 mm	1	2.05 m²	Mitred 40 mm	Undermount sink cut-out 540 × 400
Butler’s pantry	Splashback	3200 mm	600 mm	1	1.92 m²	Pencil round	New on v3 — not measured on v2
Total				8	13.20 m²

The sheet measures 13.20 m² of finished surface across 8 pieces, 1.92 m² more than v2, which measured 11.28 m² in total. Quotation QT-1188 was priced on 28.40 m² of slab, so yield on this job is read from the cut plan rather than from this sheet.

What changed on v3

1 line added

Difference between v2 and v3
Line	v2	v3	Why
Butler’s pantry splashback	—	3200 × 600 · 1.92 m²	Added by the client on the day of the site re-check.
Island top	2790 × 1100	2800 × 1100	Cabinetry set 10 mm wider than the Rev A drawing.
Main kitchen run B	1840 × 640	1840 × 640	Unchanged; the cooktop cut-out moved 30 mm to the right.

v2 measured 11.28 m² and v3 measures 13.20 m² of finished surface. Cutting stays on v2 until a director approves v3.

Revision trail

Where v3 has been and where it standsPending

Revision trail for measure sheet v3
State	On this revision	Date	Detail
Draft	Passed	10/08/2026	Started by Peter Walsh from the v2 lines after the site re-check.
Final	Not entered	—	Final belongs to the quoting measure. On this job that was v1, which priced QT-1188.
Pending	Current	11/08/2026	Submitted by Peter Walsh at 4:42pm and waiting on Hung Le.
Returned	Not entered	—	v3 has not been returned for correction.
Approved	Not yet	—	v2 has been the effective fabrication revision since 09/08/2026 and stays in force until v3 is approved.
Approved with exception	Not entered	—	No exception reason has been recorded against v3.
Superseded	Not yet	—	v3 supersedes v2 only once it is approved. v1 was superseded on 09/08/2026.

Draft and Pending belong to the production measure. Final belongs to the quoting measure, which needs no internal approval because the customer’s acceptance of the quote is the decision.